Public events often have thousands of users, our solution has the ability to monitor the quality of all key services, including Wi-Fi.

Such monitoring makes it possible to better ensure the quality of the service and to intervene proactively.…

First you need to start the SNMP agent in smartzone and set the community (password).

Now you need the MIB files ja SNMP OID documentation, wich is at the end of the post. Although today the ready-made SNMP tool is mostly used, this example is made under Linux to show the structure and performance of Smartzone MIB in more detail.

Recommendations of Ruckus APs for different environments, it is worth paying attention to the choice, because larger APs have a more complex BeamFlex+ smart antenna solution, which penetrates better through the walls and has also more electromagnetic immunity. It is also worth looking at the maximum number of customers.

Ruckus APs are managed in the Cloud, Smartzone controllers, Zonedirector, Unleashed (up to 50 APs and 1000 clients, doesn't need license).…

Ruckus has three new 7150-series ICX switches, which are very suitable for building smaller networks or as the last link in a larger network - an access switch.

ICX7150-C08P

The ICX7150-C08P is the smallest ICX switch, with a total of 10 ports, 8 of which are downlink ports with speeds of up to 1000 Mbs and PoE + capability. In addition, there are two uplink ports, one 100/1000 Mbs RJ45 …

The R750 is now available and Wi-Fi 6 802.11ax certified, the R750 also includes BLE and ZigBee radios. The device supports IoT, WPA3, OFDMA UL/DL, etc. We have also performed the first R720 comparison tests with the R750. With 802.3at (PoE+) all functionalities are working!

The R750 AP is the new 700 Series AP, the successor to the R710 and R720. The AP is particularly well-suited for locations with …

Ruckus has introduced a new innovative solution to make high-speed optical connection easier for the end user: the Ruckus Fiber Backpack. The device is primarily intended for those places where it is necessary to bring a high-speed optical connection as close as possible to the consumer, such as the user's room.

Until now, a separate device was needed to make the optical connection a consumer-friendly copper cable connection. Now it …

Before the autumn storms, a 16m high mast was installed in the port of Ruhnu, the mast solution produced by Aerial OY is very light, about 5 Kg/m, and it can be lifted on the hinges with two men. The mast can also be climbed for maintenance.

The same mast solution is also suitable for roofs and for installation at lower heights without wires.

…

Ruckus' compact ICX7100 switches are without a vent, the new model is an 8-port PoE switch with extended temperature tolerance -40C - 65C, so it is designed for places where there is no heating or proper cooling. Thus, the switch is good to use in outdoor cabinets, basements, industry, attics, etc. Siwtch has no open vents where dust can accumulate.

The following picture shows the connections and the cooling panel …

Here are some measurements in the 2.4GHz and 5GHz coverage area from the Saku Great Hall at Robotex 2019 competition. The following 2.4 GHz graphs clearly show that the latency (measured on a wi-fi network from an AP to a client) reaches up to 480ms and the median is 81ms, which means that in half of the cases the latency is greater than 81ms. This situation is caused by 2.4 …

In January 2020, a new Unleashed software update 200.8 was released.

In addition to the new features described here, some special features are now revealed:

The following 802.11ac Wave1 APs are no longer supported in Unleashed 200.8 and later:

• R310
• R500
• R600
• T300
• T300e
• T301n
• T301s

If there are any fore mentioned APs in the system, an alert will be issued during the …