RUCKUS JA IGNITENET  DISTRIBUUTOR  WI-FI SÜSTEEMIDE EKSPERT SUURÜRITUSTE INTERNET 20+ AASTAT

13/04/2021
Example use case of using L3 routing in Ruckus ICX switches.

Ruckuse switchides saab kasutada nii switchi kui ruuteri tarkvara, firmware nimetustes on alguse lühendis vahe näha SPS ja SPR vastavalt.

Ruckus ICX family has two separate firmwares, SPS for plain VLAN switch and SPR for routing with various routing protocols, like OSPF, RIP etc.

The simplest goal of a route/switch may be to divide a large network into two L2 separate networks and to create a DHCP service using a …

Loe täpsemalt
22/10/2020
New RUCKUS ICX 7550 series offers 2.5/5/10 GbE ports, 90W PoE and 100 Gbps uplinks.

CommScope announced on 20th of October its RUCKUS ICX 7550 enterprise campus switch series, a new collection of fixed form-factor, multigigabit Ethernet switches that powers simple, secure and scalable high-performance network underlays. As an edge switch, the ICX 7550 is ready to support any Wi-Fi 6, application or IoT device requirement. As a fiber-enabled aggregation/core switch, the ICX 7550 delivers industry-best port density and uplink capability. The new series is …

Loe täpsemalt
17/04/2020
RUCKUS ICX 7150 L3 SWITCH

Ruckus' ICX switches are a modern family of switches that are easy to manage and operate. All switches support remote stacking at speeds of up to 10 Gb and up to 10 Km, central REST API-based management and software upgrades.

The 7150 family is a lower-end device with a switch capacity of 304 Gbps, with a choice of PoE and non-PoE versions. In the second half of 2019, switches with …

Loe täpsemalt
17/04/2020
ICX switch management with virtual SmartZone

Like all Ruckus Access Points, the Ruckus ICX switch can be managed using the Virtual SmartZone platform. In this post, we'll look at how to add an ICX switch to vSmartZone and what the management platform interfaces are.

Preparations on ICX

First, the firmware of the ICX switch must be updated to 08.0.90a- To update the switch, you must first download the software from support.ruckuswireless.com, use the scp or tftp …

Loe täpsemalt
16/04/2020
RUCKUS ICX 7250 L3 SWITCH

The Ruckus ICX 7250 is an L3 device with up to 10km of 10Gbps stacking capability. L3 routing solutions include RIP and OSPF routing protocols and standard L3 interface operations. The 7250 also supports a dual power solution. The maximum stack size is 12 devices.

Loe täpsemalt
09/04/2020
Ruckus ICX switch setup.

Creating access

First, we connect to the ICX switch through the console. We make the physical connection with a standard USB cable with a USB-C connector on the switch side, the same cable used to charge newer phones.

The first setting is to assign a management IP to the switch and activate the web interface. Mgmt IP becomes 192.168.3.19, subnet /24, gateway 192.168.3.1 and we create a certificate.

ICX7150-C12 Switch>enable…

Loe täpsemalt
08/04/2020
New Mini-Multigig Ruckus ICX switches

Ruckus has three new 7150-series ICX switches, which are very suitable for building smaller networks or as the last link in a larger network - an access switch.

ICX7150-C08P

The ICX7150-C08P is the smallest ICX switch, with a total of 10 ports, 8 of which are downlink ports with speeds of up to 1000 Mbs and PoE + capability. In addition, there are two uplink ports, one 100/1000 Mbs RJ45 …

Loe täpsemalt
03/04/2020
Ruckus ICX-7150-C08PT compact switch with extended temperature resistance

Ruckus' compact ICX7100 switches are without a vent, the new model is an 8-port PoE switch with extended temperature tolerance -40C - 65C, so it is designed for places where there is no heating or proper cooling. Thus, the switch is good to use in outdoor cabinets, basements, industry, attics, etc. Siwtch has no open vents where dust can accumulate.

The following picture shows the connections and the cooling panel …

Loe täpsemalt
02/04/2020
Configuring Ruckuse ICX 7150 LAG ports.

Ruckus ICX switches support port aggregation, suitable configuration commands include:

ICX7150-24 Switch#configure terminal

ICX7150-24 Switch(config)#lag esimene dynamic id 1

ICX7150-24 Switch(config-lag-esimene)#ports ethernet 1/1/1 to 1/1/2

ICX7150-24 Switch(config-lag-esimene)#exit

ICX7150-24 Switch# write memory

show configuration:

lag esimene dynamic id 1
ports ethe 1/1/1 to 1/1/2

show interface brief:

Port Link State Dupl Speed Trunk Tag Pvid Pri MAC Name
1/1/1 Down None None None 1 No 1 0 xxx
1/1/2 Down None …

Loe täpsemalt
02/04/2020
INTRODUCING THE RUCKUS ICX 7850 6.4 Tbps L3 SWITCH

The Ruckus ICX 7850 is designed for aggregation of large networks and servers. It supports next generation Ethernet speeds with 10/25 Gbps at the aggregation and 40/100 Gbps at the core. Switching capacity up to 6.4 Tbps per switch. RUCKUS ICX 7850 is available with different port configurations.

Three basic models with 100 Gbps ports.


crn.com has chosen Ruckus as the best switch of 2019 ahead of its competitors. Participated …

Loe täpsemalt
support@3kgroup.ee
map-markerfacebook-squarelinkedin-squarephone-squareskypecommenting