Ruckus has three new 7150-series ICX switches, which are very suitable for building smaller networks or as the last link in a larger network - an access switch.

ICX7150-C08P

The ICX7150-C08P is the smallest ICX switch, with a total of 10 ports, 8 of which are downlink ports with speeds of up to 1000 Mbs and PoE + capability. In addition, there are two uplink ports, one 100/1000 Mbs RJ45 …

Although MESH connections have been in use since the second generation of Wi-Fi, it's only with the advent of the 6G 802.11ax standard has a new quality emerged. MESH connections are required for temporary networks or in cases where the cable network cannot be transported to all locations and it is necessary to expand the coverage area in just one part of the room, but the cabling work is complicated. …

The T310 is an 802.11ac Wave 2 AP, available in three configurations, pie chart, 120 degree sector, 30 degree sector. All sector antennas and pie chart antennas are based on the BeamFlex + smart antenna system.

The T310 can be powered by PoE or 12V, the device is IoT ready, BLE / ZigBee radios can be added.…

Virtual Smartone allows you to perform spectrum analysis of all APs (Troubleshooting menu), regardless of the location of the APs. In addition to spectrum analysis, the client's 802.11 protocol behavior can be diagnosed when it cannot access the network. In addition, WIRESHARK packet streams from both the AP and the tunnels can be stored.

But why is the airtime graph so much better than just looking …

Bumbee Labs software provides a Wi-Fi analytics solution (such as trade analytics) using signals from customers' Wi-Fi devices. The system monitors the movement of customers on the site through mobile phones and generates the necessary statistics for management optimization. The customer does not need to be logged in to the Wi-Fi network. The entire solution is EU GDPR certified and does not violate user rights. Accurate statistical methods ensure 95-98% …

The purpose of IoT is not to bring device control from a traditional shape to a smartphone or Internet browser in the same way - it seems simple, but it is still a copy of the old automation architecture in a cheaper form.

There is also no program or software that can control the system under conditions suitable for all parties, but there is constant development, new ideas and user …

The new 802.11ax Wi-Fi standard will soon open up a very large frequency band in the 6 GHz band in the United States. At the same time, winds are blowing in Europe and hopefully the representatives of all member states will quickly reach an agreement and the band 5925-6425 MHz will soon be open to new 11ax devices, the manufacturers of the chips are already ready for change. A version …

Ruckus announced the outdoor unit T750 with Wi-Fi 6, which is largely analogous to the R750 indoor unit. The device supports 4x4 MIMO radio and OFDMA 6G Wi-Fi modulation techniques.

The devices are connected to the network using SFP / SFP +, 1000 / 2500Base-T Ethernet. In addition to 802.3bt POE ++ power, there are also 230V mains power versions, which is essential for covering large outdoor areas where the …

The packaging of this base station includes fasteners that allow you to disassemble a standard wall socket, which usually has an RJ45 socket or any electrical socket, and install a 2-screw base station in place of the socket. The input on the back of the AP is 1GBase-T PoE input ethernet and at the bottom is a VLAN 2 port switch.

…

Most standards-compliant wireless IoT devices can be connected to the Ruckus IoT solution. Some devices also have plug-ins for servers that use some vendor-specific features.

3kgroup helps partners do process analytics and systems analysis, and with the help our engineers you have a fully integrated IoT solution of your own.

Managing IoT devices is similar to managing Wi-Fi APs from an IoT server. By pairing the device, the server recognizes …