RUCKUS | PLUME | IGNITENET | VAD | WI-FI EXPERTS | EVENT INTERNET | 25 YEARS OF EXPERINCE

RUCKUS ICX SWITCHES 

13/04/2021
Example use case of using L3 routing in Ruckus ICX switches.

Ruckuse switchides saab kasutada nii switchi kui ruuteri tarkvara, firmware nimetustes on alguse lühendis vahe näha SPS ja SPR vastavalt. Ruckus ICX family has two separate firmwares, SPS for plain […]

22/10/2020
New RUCKUS ICX 7550 series offers 2.5/5/10 GbE ports, 90W PoE and 100 Gbps uplinks.

CommScope announced on 20th of October its RUCKUS ICX 7550 enterprise campus switch series, a new collection of fixed form-factor, multigigabit Ethernet switches that powers simple, secure and scalable high-performance network […]

17/04/2020
RUCKUS ICX 7150 L3 SWITCH

The 7150 family has switches with capacity of 304 Gbps, with a choice of PoE and non-PoE versions. In the second half of 2019, switches with few and fast ports (2.5 Gps and 5 Gbps) are also coming.

17/04/2020
ICX switch management with virtual SmartZone

In this post, we'll look at how to add an ICX switch to vSmartZone and what the management platform interfaces are.

16/04/2020
RUCKUS ICX 7250 L3 SWITCH

The Ruckus ICX 7250 is an L3 device with up to 10km of 10Gbps stacking capability. L3 routing solutions include RIP and OSPF routing protocols and standard L3 interface operations. The 7250 also supports a dual power solution. The maximum stack size is 12 devices.

09/04/2020
Ruckus ICX switch setup.

First, we connect to the ICX switch through the console. We make the physical connection with a standard USB cable with a USB-C connector on the switch side, the same cable used to charge newer phones.

08/04/2020
New Mini-Multigig Ruckus ICX switches

Ruckus has three new 7150-series ICX switches, which are very suitable for building smaller networks or as the last link in a larger network - an access switch. ICX7150-C08P The […]

03/04/2020
Ruckus ICX-7150-C08PT compact switch with extended temperature resistance

Ruckus' compact ICX7100 switches are without a vent, the new model is an 8-port PoE switch with extended temperature tolerance -40C - 65C, so it is designed for places where […]

02/04/2020
Configuring Ruckuse ICX 7150 LAG ports.

Ruckus ICX switches support port aggregation, suitable configuration commands include: ICX7150-24 Switch#configure terminal ICX7150-24 Switch(config)#lag esimene dynamic id 1 ICX7150-24 Switch(config-lag-esimene)#ports ethernet 1/1/1 to 1/1/2 ICX7150-24 Switch(config-lag-esimene)#exit ICX7150-24 Switch# write […]

02/04/2020
INTRODUCING THE RUCKUS ICX 7850 6.4 Tbps L3 SWITCH

The Ruckus ICX 7850 is designed for aggregation of large networks and servers. It supports next generation Ethernet speeds with 10/25 Gbps at the aggregation and 40/100 Gbps at the […]

23/03/2020
ICX 8p switch PoE capability tested.

The power consumption described in the equipment specifications must be taken into account when designing the networks, as some of the required functions will be lost when the equipment is […]

support@3kgroup.ee
WordPress Appliance - Powered by TurnKey Linux