R510 is currently the most common Ruckuse 2: 2x2 MIMO Wi-Fi AP on the Estonian market. It is mainly used with UNLEASHED software, which allows you to manage up to 50 Ruckus APs without a controller, while Ruckus switches can also be managed in the same environment. In addition, the AP can be used in a cloud solution, with zonedirector, independently, in a SmartZone management environment.
The R510 is …
The Ruckus R510 received LTE uplink support in the form of the M510. The solution is well suited for buses, trains and other modes of transport due to transport certificates. But why not for a smaller and medium office where an LTE backup connection is required. Also ideal as a primary connection for small offices. The device also has a GPS receiver to track the location. See our support …
Recommendations of Ruckus APs for different environments, it is worth paying attention to the choice, because larger APs have a more complex BeamFlex+ smart antenna solution, which penetrates better through the walls and has also more electromagnetic immunity. It is also worth looking at the maximum number of customers.
Ruckus APs are managed in the Cloud, Smartzone controllers, Zonedirector, Unleashed (up to 50 APs and 1000 clients, doesn't need license).…
The T310 is an 802.11ac Wave 2 AP, available in three configurations, pie chart, 120 degree sector, 30 degree sector. All sector antennas and pie chart antennas are based on the BeamFlex + smart antenna system.
T310 nutiantenn,The T310 can be powered by PoE or 12V, the device is IoT ready, BLE / ZigBee radios can be added.…
Ruckus announced the outdoor unit T750 with Wi-Fi 6, which is largely analogous to the R750 indoor unit. The device supports 4x4 MIMO radio and OFDMA 6G Wi-Fi modulation techniques.
The devices are connected to the network using SFP / SFP +, 1000 / 2500Base-T Ethernet. In addition to 802.3bt POE ++ power, there are also 230V mains power versions, which is essential for covering large outdoor areas where the …
The packaging of this base station includes fasteners that allow you to disassemble a standard wall socket, which usually has an RJ45 socket or any electrical socket, and install a 2-screw base station in place of the socket. The input on the back of the AP is 1GBase-T PoE input ethernet and at the bottom is a VLAN 2 port switch.
H320 back view H320 mounting on recessed box.…
The R750 is now available and Wi-Fi 6 802.11ax certified, the R750 also includes BLE and ZigBee radios. The device supports IoT, WPA3, OFDMA UL/DL, etc. We have also performed the first R720 comparison tests with the R750. With 802.3at (PoE+) all functionalities are working!
The R750 AP is the new 700 Series AP, the successor to the R710 and R720. The AP is particularly well-suited for locations with …
Ruckus has introduced a new innovative solution to make high-speed optical connection easier for the end user: the Ruckus Fiber Backpack. The device is primarily intended for those places where it is necessary to bring a high-speed optical connection as close as possible to the consumer, such as the user's room.
Until now, a separate device was needed to make the optical connection a consumer-friendly copper cable connection. Now it …
The R650 is now available and Wi-Fi 6 802.11ax certified, it also includes BLE and ZigBee IOT radios (running simultaneously). The device supports IoT, WPA3, OFDMA UL / DL, etc. 512 customers can connect at the same time, which is less than the top model R750. You may ask if such a large number makes any sense at all. Yes, it does, because 512 is a very small number …
